en

Polymer makrofibra ArmoTec®

STRUCTURAL MACROFIBER
replacement of steel fiber, mesh

 

ArmoTeс® synthetic fiber is a high performance polymer fiber used as structural reinforcement in concrete and shotcrete.

The ArmoTeс® reinforcement system works by distributing hundreds of thousands of high-strength fibers throughout the entire volume of the concrete mix. They reinforce every part of the concrete structure, increasing its flexural strength.

ArmoTeс® fibers increase the impact resistance of concrete by absorbing the energy of destruction.

 

PROJECT CALCULATION FOR FREE

When ordering a shipment of ArmoTec in amount of 3 tons or more, a calculation with technical report for industrial concrete slab is provided on the basis of the customer's specification

Certificates
  • Our products are certified according to EN 14889-2: 2006
  • The FIBERMIX company quality control system is certified according to ISO 9001: 2015
  • Certificate of safety
  • CCI certification letter
product description
  • Increases flexural tensile strength
  • Reduces shrinkage during concrete hardening
  • Increases residual bearing capacity (after crack opening)
  • Increases plasticity of destruction
  • Effectively redistributes destructive loads
  • Increases crack resistance of concrete structures
  • Removes the risk of corrosion
  • Allows you to get rid of the structure reinforcement with a mesh
  • Increases the fire resistance of the concrete structure
  • Safer, lighter and cheaper to work with than steel

The dosage rate will vary depending on the concrete reinforcement requirements and on requirements for providing the needed equivalent tensile strength
and bending resistance. The recommended dosage range for ArmoTec® is 2 to 6 kg / m3. When used at the appropriate dosage,
ArmoTec® is an option to replace steel shrink mesh, metal fiber or conventional steel bars as a safe
and an easy-to-use alternative reinforcement system resistant to rust and alkali.

ArmoTec® structural macrofibers can be added to the concrete mix at any time before concrete is applied. Usually recommended
add any fibrous material in the batching plant during batching. Fibers must be mixed with concrete at least
from three (3) to five (5) minutes at maximum mixing speed, depending on the type of mixer, to ensure complete dispersion
and uniformity. Add other admixtures regardless of fiber addition. ArmoTec® synthetic macrofibre is compatible with all additives.

Application area
/var/upload/1.jpg
Industrial floors
/var/upload/3.jpg
Monolithic structures
/var/upload/2.jpg
Shotcrete (tunnels, subways)
/var/upload/4.jpg
Road surfaces, parking lots
Delivery
  • DELIVERY WORLDWIDE

     

    The FiberMix company can organize delivery of any amount of goods by land or sea and to any country which is requested  by our customers

    The company's managers will offer you the most convenient conditions for the delivery of fiber to your facilities or warehouses.

    Our company is guided by the interests of our customers and delivers as soon as possible.

     

  • DELIVERY ACROSS UKRAINE

     

    Our company uses the services of national carriers - New Mail, Meest Express, SAT and others.

    The company's managers will offer you the most convenient conditions for the delivery of fiber to your facilities or warehouses.

    Our company is guided by the interests of our customers and delivers as soon as possible.

     

Macrofiber ArmoTec®
  • What is ArmoTec® polymer macrofiber?

    ArmoTec polymer macrofiber


    ArmoTec® is a synthetic ultra-strong polymer macrofibre designed for concrete reinforcement. Polymer reinforcement fibers are especially suitable for replacing welded wire and conventional metal fiber reinforcement in concrete environments where high chemical and corrosion resistance is required.
    Additional reinforcement of concrete, due to the even distribution of a huge amount of ArmoTec® fibers throughout the entire concrete matrix, controls the process of cracking and provides the concrete with further strengthening.
    Concrete reinforced with ArmoTek has three-dimensional reinforcement with increased bending strength, impact resistance and surface wear resistance. ArmoTek polypropylene fiber will help to minimize the formation of cracks during concrete shrinkage. Thanks to the special grooved surface of the fibers, they provide excellent adhesion to concrete, increasing their effectiveness especially in shotcrete.

  • Where is ArmoTec® polymer macrofiber used?

     

    ArmoTec polymer fibers


    They are used in many branches of the construction industry. As a rule, this additive is used for construction:

    • industrial floors;
    • paving slabs; roadbed;
    • hydraulic structures;
    • warehouses;
    • bridges;
    • reinforced concrete piles;
    • screeds and warm floors;
    • decorative concrete, plaster and other solutions;
    • objects related to the petrochemical industry;
    • production of dry building mixtures;
    • cellular concrete;
    • materials for the repair of concrete surfaces, etc.

     

  • What properties of concrete will be improved by adding ArmoTec® polymer macrofiber?

     

    The main characteristics of concrete to be improved:

    • Flexural strength;
    • improved shrinkage characteristics;
    • frost resistance;
    • heat resistance;
    • salt resistance;
    • sulfate resistance;
    • wear resistance;
    • impact resistance;
    • fire resistance.

     

  • Is post-treatment of concrete necessary after adding ArmoTec® polymer macrofiber?

    Yes, it is. Final processing of concrete in accordance with current standards must be ensured.

  • Can ArmoTec® polymer macrofiber rise or sink to the concrete surface?

    Not. This is a misconception about ArmoTec® polymer macrofiber. The basic composition of concrete includes such materials as: crushed stone, sand, cement, water and appropriate additives. The rise to the surface or subsidence depends on the difference in density of the materials. As the concrete becomes viscous, it is difficult to lift or settle to the surface of the concrete.